Features of the synthesis of calcium-aluminate phases with the introduction of modifying additives
Tác giả: Mikhail Alexandrovich Trubitsyn, L.V. Furda, N.A. Volovicheva, M.N. Yapryntsev, Le Van Thuan
Số trang:
P. 61-68
Tên tạp chí:
Khoa học & Công nghệ Đại học Duy Tân
Số phát hành:
P. 61-68
Kiểu tài liệu:
Tạp chí trong nước
Nơi lưu trữ:
03 Quang Trung
Mã phân loại:
540
Ngôn ngữ:
Tiếng Anh
Từ khóa:
Calcium-aluminate phases, heat treatment, boric acid, high alumina cement, modification
Chủ đề:
Chemistry
Tóm tắt:
In this work, the influences of boric acid and high alumina cement used as modifying additives on the formation of CaO∙Al2O3 and CaO∙2Al2O3 were studied. Herein, commercially available chalk of the M-90 label and technical alumina of the G-0 label were utilized as initial raw materials. Heat treatment of powder mixtures with various concentrations of modifying additives was carried out in the temperature range of 1250-1350oC with an isothermal exposure times of 1h and 2h. It was found that the addition of additives into the raw mixture affected the ratio of target phases and the temperature interval of the phase formation of calcium-aluminate minerals.
Tạp chí liên quan
- Hình ảnh điểm đến ảnh hưởng đến ý định quay trở lại tỉnh Bình Thuận của du khách nội địa
- Các yếu tố tác động đến hiệu quả xanh của các doanh nghiệp tại Thành phố Hồ Chí Minh
- Phương tiện truyền thông xã hội và hiệu quả thu hút khách hàng tại Thành phố Hồ Chí Minh
- Tác động của tính bất định đến tính không minh bạch của ngân hàng thương mại Việt Nam
- Giao dịch của nhà đầu tư nước ngoài và giá trị doanh nghiệp